Contact Information!!

Posted: November 17, 2011 in Uncategorized

Please Email me for orders or information at RETROFITHOUSE@GMAIL.COM

Advertisements

Here are some Output pictures of the Bi Xenon setup

35w Ballasts with 4300K Bulbs

Equipped with optional Clear Lens

Email: Dmascunana@gmail.com for orders.

10A LED Brake Light Strobe Module $20

Upon applying the brake, strobe module heightens visibility by causing brake light bulb to flash 20 times for 2 seconds (10Hz), and then remain in constant on mode for as long as brake is applied. Use for LED brake lights & reverse lights only, 10 Amp maximum load, Weatherproof.

100A LED Brake Light Strobe Module $15

Upon applying the brake, strobe module causes LEDs to flash 4x rapidly for 0.4 seconds and then slowly 4x for 2.6 seconds, then remain in constant on bright mode for as long as brake is applied. Use for LED brake lights & reverse lights only. 1.25 Amp max load – Weatherproof.

100B Continuous Pulsing Strobe Module $15

Continuous Pulsing Strobe module will cause LED lights bulb to flash 6x rapidly in 1 second. Use for LED warning/hazard lights. 1.25 Amp max load – Weatherproof. Mount using included double-sided adhesive.

S2000 LED Color Kit- With the Do-It-Yourself Version, you will receive all the parts necessary to do the LED Gauge Cluster conversion yourself. You do not need to send anything to us. The AP1 Do-It-Yourself kit requires modification of your plastic gauge cluster housing using a rotary tool (Dremel) and simple soldering of one wire. Please review the AP1 DIY Kit Installation Instructions to make sure you are comfortable with the installation procedure before ordering this product.  Please Email me for orders or information at RETROFITHOUSE@GMAIL.COM

HOUSING OPTIONS:

Black housing

Custom Color please Advise when ordering

CONTACT INFORMATION:

Please Email me for orders or information at RETROFITHOUSE@GMAIL.COM

SHOPS LOCATED IN ORANGE COUNTY CA U.S.A

NEW COLORS!

Posted: August 5, 2011 in Uncategorized

Hot new colors! to spice up your project!

Kit Pictures!

Posted: July 22, 2011 in Uncategorized

Since a number of you have emailed me about taking some pictures of the Kits, here it is!

1- Bezel 2- Modified gauge trim 3- Digital converters 4-Modified  Gauge 5- Bolt on Bezel 6- Wires and Taps 7- Instructions